Project · Hampstead, NW3 · September 2026

Vaillant F.75 fault repair in Hampstead, NW3

In September 2026 a customer in Hampstead, NW3 called us about an F.75 fault code on their Vaillant boiler. From what they described on the phone, we narrowed down the likely cause before we arrived, brought a replacement pressure sensor with us, and had the boiler working again on the first visit.

When
September 2026
Where
Hampstead, NW3
Boiler
Vaillant
Fault code
F.75
Part replaced
Pressure sensor
Visits
One

What F.75 means

On a Vaillant boiler, F.75 means the boiler didn't detect the rise in water pressure it expects when the pump starts. The boiler locks out to protect itself, so there's no heating or hot water until the fault is put right. The cause is usually in the parts that move or measure the water: the pressure sensor, the pump, low system pressure or air in the system.

How a pressure sensor causes F.75

The pressure sensor measures the water pressure in the heating system and reports it to the boiler's control board. When the pump starts, the board expects to see the pressure rise. If the sensor has failed, the board never sees that rise, so the boiler shows F.75 and locks out even though the pump itself may be fine.

Narrowing it down on the phone

When the customer called, we asked about the symptoms. From what they described, a failed pressure sensor was the most likely cause, so we brought a new one to the visit. The alternative, coming out once to diagnose and again to fit the part, means two visits and longer without heating.

Fixed in one visit

At the visit we confirmed the diagnosis and fitted the new pressure sensor, and the boiler was back up and running. Because the part was already with us, the repair took one visit, which saved the customer time and kept the labour cost down.

Got an F.75 or another fault code?

Write the code down before you reset the boiler, and have the make and model to hand when you call: it's printed on the front of the boiler or underneath it. The more we know before we arrive, the better the chance we bring the right part.

Our guide to Vaillant fault codes explains the common ones, and what you can safely check yourself before you call.

More about boiler repair · More of our work in Hampstead

Get your boiler sorted

Call or WhatsApp for the quickest answer. Or leave your details and we’ll ring you back.

Heat exchanger being cleaned with a rotary brush during a service
Request a call backWe only use your details to reply to this enquiry.
Call now WhatsApp