Plumber & gas engineer in Hampstead
Gas Plumbing Safe is a Gas Safe registered plumbing and heating company working in Hampstead, NW3, a short drive from our base in West Hampstead. We install, repair and service boilers in Hampstead's houses and flats, replace hot water cylinders, and issue landlord gas safety certificates.
- Based nearby in West Hampstead, NW6
- £120 repair visit, up to one hour on site
- Boilers, repairs, servicing and certificates

What we’ve done in NW3
What Hampstead customers say
“James, Paul and the team at Gas Plumbing Safe carried out all the plumbing and heating work for our full property refurbishment in Belsize Park. The work included three bathrooms with walk-in showers and concealed pipework, relocating bathrooms to suit the new layout, and reconfiguring the drainage. They also installed a new boiler in the loft, a new hot-water cylinder, column radiators throughout and a mains-water booster to improve the pressure. It was a substantial project, and having the team handle everything from the drainage to the new heating system made a real difference. Thank you to James and Paul for all their hard work. Highly recommend Gas Plumbing Safe.”
“BOILER INSTALATION + CYLINDER INSTALATION – NW3 Highly recommend James Mulcahy from NW6 Gas Plumbing Safe. We needed to replace a troublesome old Keston 45 boiler servicing 33 radiators and three bathrooms over four floors, along with a leaking hot water cylinder. We had originally hoped to switch to a Vaillant, but James expertly navigated the complex flue run snaking up to the roofline and advised us that sticking with a Keston 45 was the only way to make the existing long flue pipework work safely. He also decommissioned and removed our redundant solar heating setup, replacing our old tank with a top-quality Megaflo cylinder. The work in such a tight utility space is exceptionally neat, tidy and professional. Excellent communication and problem-solving throughout—I wouldn't hesitate to use him again.”
Boiler flues in the Hampstead Conservation Area
Much of Hampstead sits inside the Hampstead Conservation Area, which Camden Council designated on 29 January 1968. It covers the old village and reaches out to Frognal, Rosslyn Hill and South End Green.
That matters when you replace a boiler. Under the national planning rules, a new flue on a wall that faces the road, at the front or side of a house in a conservation area, needs planning permission. Flats have no permitted development rights at all, so a new flue through an outside wall of a flat can need permission too.
So before we quote in Hampstead, we look at where the flue can go. Wherever we can, we reuse the existing flue route. On a Keston boiler replacement in NW3 the flue ran a long and complicated way through the house, so we fitted a boiler that could keep it.
Old village streets and big Victorian houses
Camden's statement on the conservation area describes how Hampstead's hill gives the village "the complex of narrow streets and steps" it is known for, with the 18th-century village still standing next to streets laid out in the Victorian era.
For a boiler job that means planning the route in and out before the day: how the old boiler comes out, how the new one and the materials get in, and where the cylinder or tanks are. In the bigger houses the heating is often a system or regular boiler with a hot water cylinder, spread over several floors, and we size the replacement for that rather than defaulting to a combi.
Boiler installation in Hampstead
Our most recent installation in Hampstead was in July 2026: a four-storey house with 33 radiators and three bathrooms, where the old Keston 45 boiler and a leaking hot water cylinder both needed replacing. We fitted a new Keston 45 to keep the existing flue arrangement, replaced the cylinder with a new Megaflo unvented cylinder, and removed the redundant solar heating system, all in a very tight utility space.
Every installation includes removing the old boiler, a system filter, commissioning, the Benchmark checklist, building control notification and the guarantee registration. With the boiler staying in the same place, a Vaillant costs £3,000 to £4,000 and a budget boiler £2,200 to £3,000; see boiler installation for what changes the price.
What we can do for you







Boilers and plumbing in Hampstead: your questions
Do I need planning permission for a new boiler flue in Hampstead?
Only in some cases. In a conservation area, which covers much of Hampstead, a new flue on a wall facing the road at the front or side of a house needs planning permission, and flats have no permitted development rights at all. Reusing the existing flue position usually avoids it, and we check the flue route before we quote.
Do you cover all of Hampstead, NW3?
Yes: the village, Frognal, South End Green, and across to Belsize Park, which shares the NW3 postcode. We're based in West Hampstead, NW6, so Hampstead is close by.
Do you charge more for evening call-outs in Hampstead?
Evening visits between 5pm and 10:30pm are £159, seven days a week, the same everywhere we cover. During the day, a boiler repair visit is £120. Both include up to one hour on site, and £60 comes off the visit if you go ahead with a quoted repair.
Need a plumber or gas engineer in Hampstead?
Call or WhatsApp for the quickest answer. Or leave your details and we’ll ring you back.

