Project · Hampstead, NW3 · July 2026

Keston boiler and cylinder replacement in Hampstead, NW3

In July 2026 we replaced an ageing Keston 45 boiler and a leaking hot water cylinder in a four-storey house in Hampstead, NW3. The house has 33 radiators and three bathrooms, and its flue takes a long, complex route up through the building, so the choice of boiler came down to what that flue could safely take.

When
July 2026
Where
Hampstead, NW3
Property
Four storeys, 33 radiators, three bathrooms
Old system
Keston 45 boiler, leaking cylinder, solar heating
New
Keston 45 boiler, Megaflo unvented cylinder
Also
Old solar heating system taken out
Hot water cylinder and pipework in a Hampstead airing cupboard

The problem

The Keston 45 had reached the end of its working life, and the hot water cylinder had started to leak. Both needed replacing in a house that asks a lot of its heating: 33 radiators over four floors, and three bathrooms that can all be in use at once. There was also an old solar water heating system that no longer did anything useful.

Why we fitted another Keston

The customer had hoped to switch to a Vaillant, the brand we fit most. But the existing flue runs a long, winding route up through the house to the roofline, and every boiler can only be used with the flue lengths and fittings its manufacturer allows.

We advised that a new Keston 45 was the only way to keep using that long flue safely. Replacing the flue instead would have meant opening up the house along its whole route. So we kept the existing flue arrangement and fitted the new Keston to it. When the boiler we'd usually recommend isn't the right one for a house, we say so.

A Megaflo for three bathrooms

The leaking cylinder was replaced with a new Megaflo unvented cylinder. An unvented cylinder is fed straight from the water main, so it delivers hot water at mains pressure. That suits a house like this one, where several showers and taps can run at the same time.

We also decommissioned the redundant solar heating system and removed it. More on cylinders, and how we service them, on our hot water cylinder page.

A tight space, finished neatly

All of this happened in a very restricted utility space, which made it a challenging installation. The new boiler, cylinder and pipework were fitted neatly, and the system was commissioned and left fully working.

More about boiler installation · More about hot water cylinders · More of our work in Hampstead

Get your boiler sorted

Call or WhatsApp for the quickest answer. Or leave your details and we’ll ring you back.

Heat exchanger being cleaned with a rotary brush during a service
Request a call backWe only use your details to reply to this enquiry.
Call now WhatsApp