Plumber & gas engineer in Highgate

Gas Plumbing Safe is a Gas Safe registered plumbing and heating company based in West Hampstead, NW6, under three miles from Highgate village. In Highgate, N6, we repair, service and replace boilers, look after hot water cylinders and carry out landlord gas safety checks, whichever side of the borough boundary your home is on.

  • Based nearby in West Hampstead, NW6
  • £120 repair visit, up to one hour on site
  • Boilers, repairs, servicing and certificates
Get a quote 5.0 on Google from 61 reviews
Older Megaflo unvented hot water cylinder with a red expansion vessel and copper pipework in a cramped cupboard

A village divided between Camden and Haringey

Highgate has a long history of being split between authorities, and today the borough boundary runs through the middle of the High Street. Haringey covers the north and east of the village, Camden the south and west, and Islington takes in a corner too. Camden and Haringey each have their own Highgate Conservation Area: Haringey designated its side on 21 December 1967, and Camden designated its side in 1968, extending it in 1978 and 1992.

Neither council has made an Article 4 Direction to remove householders' permitted development rights in Highgate. Haringey lists none for its Highgate Conservation Area, Highgate doesn't appear among Camden's heritage directions, and Camden's 2007 appraisal says only that their use "will be kept under review".

That leaves the national rules in charge on both sides. In a conservation area, a new flue or soil and vent pipe needs planning permission if it goes on a wall or roof slope that faces a road and is the front or side of the house. At the back it can usually go ahead without an application, as long as it ends less than a metre above the top of the roof. Flats get no permitted development rights, so in a converted house or a block a new flue position can need permission wherever it goes.

More detached houses than any other Camden ward

Camden's side of Highgate has the borough's largest share of detached houses. In the 2021 Census, 347 of the 4,446 households in Camden's Highgate ward (7.8%) lived in a detached house, the highest of Camden's 20 wards and more than four times the borough's 1.7%. Counting every kind of house, 30.0% of households there had one, second only to Hampstead Town. Camden's appraisal adds that after the war several of the larger houses were divided into flats.

Big houses here often store their hot water in a cylinder rather than heating it on demand. Where that cylinder is an unvented one, working at mains pressure, its safety valves and expansion vessel need testing every year, and it makes sense to do that on the same visit as the boiler. The ward also had 490 households (11.0%) heated by a district or communal network, more than Camden's 9.4%. Those flats take their heat from a plant room that the building runs.

Haringey's side: terraces, shop flats and gas

North and east of the High Street, Haringey's Highgate ward leans on gas even more. In 2021, 4,379 of its 5,775 households (75.8%) heated their homes with mains gas alone, against 72.8% across Haringey. Converted flats are commoner too: 28.1% of households lived in part of a converted or shared house, against 22.8% for the borough.

Haringey's appraisal describes Archway Road lined with late Victorian and Edwardian shop parades with flats over, and planned streets of terraces off it, such as the Cholmeleys, the Miltons and Shepherd's Hill. In a flat above a shop or in a converted terrace, a boiler often has only one outside wall to flue through. When we replace a boiler in a flat like that, we try to keep the existing flue route, because a new opening can mean a planning application. If the flat is let, it also needs a gas safety check every year.

Boilers and plumbing in Highgate: your questions

Which council deals with planning for a boiler flue in Highgate?

The one on your side of the High Street. The borough boundary runs down the middle of it, with Haringey to the north and east and Camden to the south and west. Both councils have a Highgate Conservation Area, and neither has an Article 4 Direction on house alterations there, so the national rules on flues apply. If a new flue would face the street, ask that council before any work is booked.

Do you work in Highgate, N6?

Yes, on both the Camden and Haringey sides. We're based in West Hampstead, NW6, under three miles away, and we work from 7am to 10:30pm, seven days a week, on boiler repairs, servicing and new installations.

Should a large Highgate house have a combi boiler?

Usually not, if two or more bathrooms get used at the same time. A combi heats water as it flows, so it suits a flat or a house with one bathroom. A system boiler with a hot water cylinder keeps hot water stored, ready for several taps and showers at once. Our guide to choosing between a combi and a system boiler goes through the differences.

Need a plumber or gas engineer in Highgate?

Call or WhatsApp for the quickest answer. Or leave your details and we’ll ring you back.

Heat exchanger being cleaned with a rotary brush during a service
Request a call backWe only use your details to reply to this enquiry.
Call now WhatsApp